 | Brand Hydraulics 12 VDC Electronic Control Box, Model# EC-12-01
Brand: Brand Hydraulics
Proportionally controls electronic flow control valve. Main control knob adjusts current going through the valve coil. Good for outdoor use. U.S.A. | *$229.99 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-102 (1 Each)
Brand: Enerpac Part Number: RW-102
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$274.00 |
 | Prince Tie-Rod Cylinder - 2500 PSI, 3in. Bore, 8in. Stroke, 1 1/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/8 | *$149.99 |
 | Breather Cap Assembly With Locking Tab
Brand: Northern Tool Equipment
Has locking tab. 1/4 turn chrome filler breather cap with chain. Also has one 15 micron strainer basket and one mounting flange with 2 gaskets. | *$14.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.875-16, K=5/16-24 (1 Each)
Brand: De-Sta-Co Part Number: 010-022-225 | *$176.92 |
 | Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 48in. Stroke, 2in. Shaft Size
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 48, Closed Pin Center (in.): 58, Shaft Diameter (in.): 2 | *$419.99 |
 | Northman Fluid Power Modular Valve Stack Bolt Kit - To Mount 1 NFPA D03 Valve 1 NFPA D03 Modular Valve, Model# MBK021
Brand: Northman Fluid Power
This Northman bolt kit includes 4 threaded bolts and 4 nuts to mount a stack of one directional control valve and one modular valve. Designed for the NFPA D03 size valve series. | *$19.99 |
 | Handle Kit for Item# 2010
Brand: Northern Tool Equipment
Replacement handle kit for the Standard 4-Way Control Valve #2010. | *$14.99 |
 | Metro Machine Check Valve, 1/2in. Port Size, 3000 PSI
Brand: Buyers
Will hold pressure in one direction and free flow in other. One end male pipe thread, other end female pipe thread. Free flow direction, male port to female port. Max pressure 3000 PSI. Port Size (in.): 1/2, Max. PSI: 3,000 | *$19.99 |
 | Dynamic Gear Pump - .97 Cu. In., Model# GP-F20-16-P-A (CCW)
Brand: Dynamic
All-aluminum high-pressure hydraulic gear pump. | *$109.99 |
 | NorthStar Steel Hydraulic Oil Tank, 4.8 gallon
Brand: NorthStar
Features sturdy 12-gauge steel welded construction. Welded-on mounting brackets. Includes clip-on style breather cap. Suction strainer Item# 4011 fits oil tank Item# 4050 (strainer not included). Capacity (gal.): 4.8, Suction Port (in.): 11/2, Return Port (in.): 3/4, Mount Type: 4 bolt, Material Type: Steel, Dimensions L x W x H (in.): 15 x 9 x 8 | *$79.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 3/4in. Shaft, Model# GP-F20-16-P1-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. | *$185.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-06-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. | *$175.99 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each)
Brand: Enerpac Part Number: SURS-51
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$430.00 |
 | Northman Fluid Power Modular Valve Stack Bolt Kit - To Mount One NFPA D03 Valve 2 NFPA D03 Modular Valves, Model# MBK022
Brand: Northman Fluid Power
This Northman bolt kit includes 4 threaded bolts and 4 nuts to mount a stack of one directional control valve and two modular valves. Designed for the NFPA D03 size valve series. | *$21.99 |
 | Elkhart Prod. Corp. 10170030 QTite Reducing Coupling Less Stop
Brand: Elkhart Part Number: 10170030
QTite, 3 4'' x 1 2'' reducing coupling, less stop. QTite fittings provide a clean and easy joining method that's designed to save time and money on installations, installing a joint is simple, requires no extra materials for copper and CPVC tubing installations , and a tube liner for PEX installations, no more solder, flux, heat, or special pressing tools needed. Results in lower costs, reduced labor time, and a clean and efficient installation process. | *$4.96 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-20-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in./rev. | *$185.99 |
 | Haldex Cast Iron Hydraulic Gear Pump - 3.33 Cu. In., Model# 2102728
Brand: Haldex
Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM. Similar to Webster YD Series. Parker M Series. Rexroth S20, Cross 50P, Cessna 25550, Ultra 2PX, 2PR and 3PR. Commercial P330, and Tyrone P16. Standard SAE 2-bolt B flange, 4.00in. diameter pilot with 7/8in. x 1 5/8in. shaft, 1/4in. square key. SAE O-ring ports: inlet 1 5/8-20, outlet 1 1/16-12. 85% efficient. U.S.A | *$269.99 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: De-Sta-Co Part Number: 010-023-335 | *$228.37 |
 | Hydraulic Pump Mounting Bracket
Brand: Northern Tool Equipment
With Northerns mounting brackets, you can speed assembly time, ensure shaft alignment and improve compactness and appearance at a reasonable price. 2-bolt brackets for J.S. Barnes 22 and 28 GPM pumps. Fit our items 1057 and 1058 pumps. | *$59.99 |
 | Red Lion Welded Double-Acting Cylinder - 2500 PSI, 36in. Stroke, Model# 25WC36-150
Brand: Red Lion
Excellent for loaders, engine hoists and small boom conveyors. 1 1/2in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$229.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1 5/16-16 thds., Stroke=.500 (1 Each)
Brand: De-Sta-Co Part Number: 010-211-002
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$118.85 |
 | Apache Hydraulic Hose 3/4in. Dia. 100ft. Length, 2250 PSI rated
Brand: Apache Hose
Boxed hydraulic hose. You can cut it to lengths you need and attach reusable couplings, sold separately. SAE 100R2, type AT. 2250 PSI. Hose Diameter (in.): 3/4, Hose Length (ft.): 100, Working Pressure (PSI): 2,250 | *$219.99 |
 | Buyers Flush-Face Coupler - 1/2in. Female; 1 1/16-12 UNF Port NPT, Model# FF08S12
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$59.99 |
 | Brand Hydraulics Side-Ported Adjustable Flow Control Valve - 3/4in. NPT ports, 0-30 GPM, Relief Valve, Model# PFCR51-3/4
Brand: Brand Hydraulics
Brand Hydraulics side-ported adjustable flow control valve will start or stop a hydraulic cylinder or motor and vary speed over wide range. Once set, maintains constant speed regardless of load variation. Excess flow is returned to tank or used to power another function. Internal relief valve. U.S.A. | *$79.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-16-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. | *$185.99 |
| | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity=10,000 lbs. (1 Each)
Brand: De-Sta-Co Part Number: 040-1-10000
Hydraulic Power Workholding - Spring Advance Work Supports | *$374.03 |
 | SEPTLS277WMC2000 - Self-Contained Hydraulic Cutters
Brand: Enerpac Part Number: 277-WMC-2000
Self-Contained Hydraulic Cutters | *$2,000.00 |
| Haldex Cast Iron Hydraulic Gear Pump 1.8 Cu. In., Model# 2102724
Brand: Haldex
Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM. Similar to Webster YD Series. Parker M Series. Rexroth S20, Cross 50P, Cessna 25550, Ultra 2PX, 2PR and 3PR. Commercial P330, and Tyrone P16. Standard SAE 2-bolt B flange, 4.00in. diameter pilot with 7/8in. x 1 5/8in. shaft, 1/4in. square key. SAE O-ring ports: inlet 1 5/8-20, outlet 1 1/16-12. 85% efficient. U.S.A | *$249.99 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-18131ST (1 Each)
Brand: Enerpac Part Number: CTS18131
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$125.00 |
| Prince Tie-Rod Cylinder - 2500 PSI, 4in. Bore, 8in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 2 | *$229.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 8in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 2 | *$269.99 |
 | Buyers Flush-Face Plug - 5/8in. Male; 3/4in. Port NPT, Model# FM1012
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$44.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-08-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.48 cu. in./rev. | *$175.99 |
 | Lion 2500 PSI Heavy-Duty Tie Rod Hydraulic Cylinder - 3 1/2in. Bore, 18in. Stroke, Model# 639189
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with antiextrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. 2 1/2-year limited warranty. | *$139.99 |
 | Large Angle Type Mount
Brand: Northern Tool Equipment
For use with the 22 GPM two stage SAE A flange pumps. | *$46.99 |
 | Hydraulic Pump Mounting Bracket
Brand: Northern Tool Equipment
With Northerns mounting brackets, you can speed assembly time, ensure shaft alignment and improve compactness and appearance at a reasonable price. 4-bolt brackets for J.S. Barnes 11, 13.6 and 16 GPM pumps. Items 3030 and 3031 are Zytel fiberglass-reinforced nylon, all others are cast aluminum. Fit our pumps 1012, 1053 and 1056. U.S.A. Bracket Length (in.): 4 7/8, Bolt Circle (in.): 6 1/2, Mounting Type: 4 bolt | *$64.99 |
 | 90 Degree Free Swinging, Southco Fixed Installation Concealed Hinges, Stainless Steel (1 Each)
Brand: Southco Part Number: R6-21-23
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket. | *$9.30 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C=2.128, O=1/4-20 (1 Each)
Brand: De-Sta-Co Part Number: 090-021-111 | *$209.21 |
| Prince Tie-Rod Cylinder - 3000 PSI, 2 1/2in. Bore, 24in. Stroke, 1 1/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 1/4 | *$179.99 |
 | Brand Hydraulics Side-Ported Adjustable Flow Control Valve - #12 SAE ports, 0-30 GPM, Model# PFCR51-12SAE
Brand: Brand Hydraulics
Brand Hydraulics side-ported adjustable flow control valve will start or stop a hydraulic cylinder or motor and vary speed over wide range. Once set, maintains constant speed regardless of load variation. Excess flow is returned to tank or used to power another function. U.S.A. | *$74.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-04-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. | *$175.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 19.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Tandem Center Spool, 120 Volt AC Solenoids, Model# SWH-G03-C6-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$139.99 |
 | Haldex AC Hydraulic Power System Self-Contained, 5 HP, 230/460V AC, Model# 1400031
Brand: Haldex
Handles a wide variety of industrial applications. All models have 3450 RPM TEFC (totally enclosed, fan-cooled) motors, check valve, adjustable relief valve and 3000 PSI pressure gauge. High strength cast iron housing. DU bearings. Filler screen, sight gauge and flexible coupling. Hardened and ground alloy steel gears and shafts. Pressure-balanced pumps provide up to 90% overall efficiency. Ideal for systems using low viscosity fluids in high temps and high duty cycle applications. High/low pump provides high speed positioning and then maximum working pressure as in clamping, crimping and metal-forming machines. Does not include manifold or interface. Truck Ship. | *$1,499.99 |
| Buyers Flush-Face Coupler - 3/8in. Female; 1/2in. Port NPT, Model# FF0608
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$39.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-14-P1-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.85 cu. in./rev. | *$185.99 |
 | Northman Fluid Power In-Line Hydraulic Check Valve - 30.4 GPM, 3000 PSI, 3/4in. NPT Ports, Model# CIT0605
Brand: Northman Fluid Power
This Northman in-line check valve is designed to allow free flow of oil in a hydraulic system in one direction and block flow in the reverse direction. | *$29.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-25-P-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
 | Lion Welded Hydraulic Cylinder - 3000 PSI, 2in. Bore, 24in. Stroke, Model# 644807
Brand: Lion 3000
Double-acting, double-ported welded tie rods are perfect for industrial, agricultural and contractor applications. Features chrome rod, crown piston seals with wear ring, hallite rod seals, double lug base end, threaded rod end with ductile rod clevis and 3/4-16 ORB (SAE 8) ports inline with pins. 1in pin hole size. Complete with pins and cotter pins. | *$159.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 8in.Stroke, 1 1/2in. Shaft, Model# PMC-8308
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 8, Closed Pin Center (in.): 16, Shaft Diameter (in.): 1 1/2 | *$159.99 |
|
