 | Metro Machine Selector Valve, 3/4in.
Brand: Northern Tool Equipment
Made of high strength cast iron with a chrome-plated, pressure balanced spool. These valves are interchangeable with Gresen selector valves. 6 port double selector valve diverts two flows in either of two separate circuits. Enables you to run two cylinders with one value. 3000 PSI. | *$106.99 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each)
Brand: Enerpac Part Number: SURS-51
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$430.00 |
 | SEPTLS277WMC2000 - Self-Contained Hydraulic Cutters
Brand: Enerpac Part Number: 277-WMC-2000
Self-Contained Hydraulic Cutters | *$2,000.00 |
 | Gallon Hand Pump Oil (277-LX-101) Category: Hydraulic Oils
Brand: Enerpac Part Number: 277-LX-101
Item #: 277-LX-101. Good low temperature performancebrNOT for use in power pumpsbrReduced handle effort over other oilbrSpecially formulated for hand pumps with anti-sludge, anti-rust additives pulliCapacity Volume = 1 galliFlash Point = 370.00 °FliPour Point = -30.0 °FliWt. = 8 lb/ul brCustomers also search for: Discount Gallon Hand Pump Oil, Buy Gallon Hand Pump Oil, Wholesale Gallon Hand Pump Oil, 662005126347, LX-101, Hydraulic Oils | *$46.04 |
 | Haldex High Performance Gear Pump .976 Cu. In., Model# WP09A1B160R03BA102N
Brand: Haldex
Compact, high-performance package is constructed of high-strength aluminum housing with cast iron end covers. Ideal for a wide variety of applications such as material handling, aerial lifts, turf care, agriculture and construction. Low-noise pumps have SAE A 2-bolt mounts and SAE O-ring side ports. W900 Series: 90% efficiency, 3/4in. keyed shaft. U.S.A. | *$184.99 |
 | Enerpac Hydraulic Power Workholding Low Profile Swing Clamp No. ASC-30, Clamp force=1,375 lbs. (1 Each)
Brand: Enerpac Part Number: ASC-30
These low profile swing clamps are designed to swing 97degrees to position the arm over the work piece. A vertical plunger then exerts an upward thrust on the back end of the swing arm providing powerful downward pressure to clamp the work piece. Arm can swing right or left. Operating pressure is 1,200 to 2,500 psi. | *$602.00 |
 | Buyers Flush-Face Plug - 5/8in. Male; 3/4in. Port NPT, Model# FM1012
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$44.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 3/4in. Shaft, Model# GP-F20-25-P1-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
 | Northman Fluid Power Modular Valve Stack Bolt Kit - To Mount 1 NFPA D03 Valve 1 NFPA D03 Modular Valve, Model# MBK021
Brand: Northman Fluid Power
This Northman bolt kit includes 4 threaded bolts and 4 nuts to mount a stack of one directional control valve and one modular valve. Designed for the NFPA D03 size valve series. | *$19.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 24in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 24, Closed Pin Center (in.): 36 1/4, Shaft Diameter (in.): 2 | *$389.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 3in. Bore, 16in. Stroke, 1 3/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 1 3/8 | *$179.99 |
 | Watts Water Technologies 15P-16 Poly Pex Coupling
Brand: Watts Water Technologies Part Number: 15P-16
Used for making WaterPEX repairs in the field, continuing a run as well as transitioning from polybutylene pipe to WaterPEX tubing. No. 15P 08: 1 2'' CF x 1 2'' CF No. WP15P 08PB: 10 pack, 1 2'' CF x 1 2'' CF No. 15P 1208: 3 4'' CF x 1 2'' CF No. 15P 12: 3 4'' CF x 3 4'' CF No. WP15P 12PB: 10 pack, 3 4'' CF x 3 4'' CF No. 15P 1612: 1'' CF x 3 4'' CF No. WP15P 1612PB: 10 pack, 3 4'' CF x 1'' CF No. 15P 16: 1'' CF x 1'' CF No. WP15P 16PB: 10 pack, 1'' CF x 1'' CF | *$1.92 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 10.7 GPM, 4500 PSI, 3-Position, Double Solenoid, Tandem Center Spool, 120 Volt AC Solenoids, Model# SWH-G02-C6-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports. | *$119.99 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-102 (1 Each)
Brand: Enerpac Part Number: RW-102
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$274.00 |
 | Haldex 12 Volt DC Power Unit - Manual Operation, Single Acting, Model# 1261033
Brand: Haldex
The Haldex 12V DC power unit is used in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. U.S.A. Flow (GPM): 1.4 GPM at 1,600 PSI, Reservoir Capacity: 3 qt., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, Volts: 12 DC | *$329.99 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder w/Arm No. SC-3, M=1-12 (1 Each)
Brand: Enerpac Part Number: SC-3
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket. | *$478.00 |
 | Haldex AC Hydraulic Power System Self-Contained, 2 HP, 115/230V AC, Model# 1400028
Brand: Haldex
Handles a wide variety of industrial applications. All models have 1725 RPM TEFC (totally enclosed, fan-cooled) motors, check valve, adjustable relief valve and 3000 PSI pressure gauge. High strength cast iron housing. DU bearings. Filler screen, sight gauge and flexible coupling. Hardened and ground alloy steel gears and shafts. Pressure-balanced pumps provide up to 90% overall efficiency. Ideal for systems using low viscosity fluids in high temps and high duty cycle applications. High/low pump provides high speed positioning and then maximum working pressure as in clamping, crimping and metal-forming machines. Does not include manifold or interface. Reservoir Capacity: 5 gal., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, HP: 2, Volts: 115, 230 AC, Phase: 1 | *$999.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-20-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 3/4in. Shaft, Model# GP-F20-25-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
 | Lion Heavy-Duty Tie-Rod Cylinder - 2500 PSI, 3in. Bore, 8in. Stroke, 1 1/4in. Shaft, Model# 30TL08-125 ASAE
Brand: Lion 2500
Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/4 | *$99.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 3 1/2in. Bore, 12in. Stroke, 1 3/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 12, Closed Pin Center (in.): 22 1/4, Shaft Diameter (in.): 1 3/8 | *$189.99 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C=2.128, O=1/4-20 (1 Each)
Brand: De-Sta-Co Part Number: 090-021-111 | *$209.21 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C=2.441, O=5/16-24 (1 Each)
Brand: De-Sta-Co Part Number: 090-012-221 | *$236.62 |
 | Brand Hydraulics Side-Ported Adjustable Flow Control Valve - #12 SAE ports, 0-30 GPM, Model# PFCR51-12SAE
Brand: Brand Hydraulics
Brand Hydraulics side-ported adjustable flow control valve will start or stop a hydraulic cylinder or motor and vary speed over wide range. Once set, maintains constant speed regardless of load variation. Excess flow is returned to tank or used to power another function. U.S.A. | *$74.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-16-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. | *$185.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 36in. Stroke, 2in.Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 36, Closed Pin Center (in.): 48 1/4, Shaft Diameter (in.): 2 | *$419.99 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 3 1/2in. Bore, 14in. Stroke, Model# 35TL14-125
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 14, Closed Pin Center (in.): 24 1/4, Shaft Diameter (in.): 1 1/4 | *$129.99 |
 | Dynamic Fluid Components Hi/Lo Hydraulic Gear Pump - 8 GPM, 2-Stage, Model# GP-CBN-080-P-C
Brand: Dynamic
The Dynamic Fluid Components hi/lo hydraulic gear pump provides max. pressure of 900 PSI for low pressure and 3000 PSI for high pressure, making it an ideal choice for log splitters, presses and similar equipment requiring rapid movement of the cylinder at low pressure prior to switching to the high pressure mode to meet load requirements. | *$275.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1 5/16-16 thds., Stroke=.500 (1 Each)
Brand: De-Sta-Co Part Number: 010-211-002
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$118.85 |
 | Northman Fluid Power In-Line Hydraulic Check Valve - 30.4 GPM, 3000 PSI, 3/4in. NPT Ports, Model# CIT0605
Brand: Northman Fluid Power
This Northman in-line check valve is designed to allow free flow of oil in a hydraulic system in one direction and block flow in the reverse direction. | *$29.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-25-P-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-06-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-25-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 8in.Stroke, 1 1/2in. Shaft, Model# PMC-8308
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 8, Closed Pin Center (in.): 16, Shaft Diameter (in.): 1 1/2 | *$159.99 |
 | Buyers Flow Control Valve-3/4in.
Brand: Buyers Products
Precision flow control and full shutoff in one flow direction, unrestricted flow in opposite direction. Ideal for control of flow to hydraulic motors as a means of controlling motor speed. 3000 PSI, steel construction. Port Size (in.): 3/4, Max. Flow (GPM): 25, Max. PSI: 3,000 | *$69.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 19.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Tandem Center Spool, 120 Volt AC Solenoids, Model# SWH-G03-C6-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$139.99 |
 | 90 Degree Free Swinging, Southco Fixed Installation Concealed Hinges, Stainless Steel (1 Each)
Brand: Southco Part Number: R6-21-23
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket. | *$9.30 |
 | Buyers Flush-Face Coupler - 3/8in. Female; 1/2in. Port NPT, Model# FF0608
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$39.99 |
 | Apache Hydraulic Hose 3/4in. Dia. 100ft. Length, 2250 PSI rated
Brand: Apache Hose
Boxed hydraulic hose. You can cut it to lengths you need and attach reusable couplings, sold separately. SAE 100R2, type AT. 2250 PSI. Hose Diameter (in.): 3/4, Hose Length (ft.): 100, Working Pressure (PSI): 2,250 | *$219.99 |
 | Northman Fluid Power Modular Hydraulic Flow Control Valve - 20 GPM, 3000 PSI, Ports A B, Reverse Free Flow, Model# MT03
Brand: Northman Fluid Power
This Northman flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is a free flow over a check valve. Valve mounts as a modular unit between a D05 size directional control valve and the subplate. Contains 2 separate pilot-operated check valves-one each on A cylinder port and B cylinder port. Allows metered flow adjustment in the cylinder ports as the flow exits, controlling the speed of the cylinder. As separate valves, speed may be controlled independently for the extend and retract operations. Requires longer than standard bolt kit to mount this flow control in valve stack. | *$109.99 |
 | Hose Half Coupler (male) (277-AH-630) Category: Hydraulic Tool Parts and Accessories
Brand: Enerpac Part Number: 277-AH-630
Item #: 277-AH-630. For use with small cylinders and hand pumps pulliOperating Pressure = 10000.0 psi [Max]liFlow = 2500.0 cu. in./min [Max]liThread Size = 1/4 in (NPTF)liInside Style = RegularliType = Male CouplerliWt. = 0.10 lb/ul brCustomers also search for: Discount Hose Half Coupler (male), Buy Hose Half Coupler (male), Wholesale Hose Half Coupler (male), 662005201389, AH-630, Hydraulic Tool Parts and Accessories | *$19.95 |
 | Large Angle Type Mount
Brand: Northern Tool Equipment
For use with the 22 GPM two stage SAE A flange pumps. | *$46.99 |
 | Prince Standard 3-Way Control Valve, Model# RD-2575-T3-ESA1
Brand: Prince
A control valve for operating single-acting cylinders. This valve has 3 ports, 3-position spring center to neutral and adjustable relief valve. Relief valve preset at 1500 PSI, adjusts up to 3000 PSI. Convertible from open to closed center. 3/4in. in/out ports, 1/2in. working ports. U.S.A. | *$109.99 |
 | Prince Bolt Kit for 2 Spools
Brand: Prince
Each kit contains: 3 bolts, 6 nuts and 6 washers. | *$9.99 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-22, Use w/cap.=500 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-22
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$52.00 |
 | Lincoln, Guardian Hydraulic Coupler Grease Fittings 1/4"-28, 10 pieces per package, (G634)
Brand: Lincoln
Lincoln grease fittings are used for construction equipment and machine manufacturers. The ball check in the head of the fitting prevents dirt and grit from getting to the bearing. The true spherical contour of the fitting head provides a natural ball and socket joint between the fitting and any commercial hydraulic coupler common to grease guns and grease transfer pump assemblies.
The internal spring on the fittings is tempered with music wire, coiled so that it cannot be compressed to restrict the flow of heavy lubricants, or forced out of the body under normal pressures. The fittings have a specially formed lip at the fitting base that locks the spring and ball securely in place. | *$3.89 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing RH, Double Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-D-475-R | *$311.44 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 2in. Bore, 20in. Stroke, 1 1/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 20, Closed Pin Center (in.): 30 1/4, Shaft Diameter (in.): 1 1/8 | *$159.99 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 3000 PSI, 2 1/2in. Bore, 24in. Stroke, Model# 25TH24-125
Brand: Lion 3000
Built tough for agricultural and industrial applications. 3000 PSI model is designed to withstand shock loads of up to 6000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Cylinder can be single or double acting. Attach one port for single and both ports for double acting. Max. PSI: 3,000, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 1/4 | *$149.99 |
| | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity=10,000 lbs. (1 Each)
Brand: De-Sta-Co Part Number: 040-1-10000
Hydraulic Power Workholding - Spring Advance Work Supports | *$374.03 |
|
