|
|
 | Air Brake Compression Female NPT Connector, 1/8" Pipe Size, 1/4" tube size
Brand: IWS
Air Brake Compression Female NPT Connector, 1/8" Pipe Size, 1/4" tube size | *$2.16 |
 | Air Brake Compression 45° Male NPT Connector, 1/2" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression 45° Male NPT Connector, 1/2" Pipe Size, 3/8" tube size | *$10.58 |
 | Air Brake Compression 90° Male NPT Connector, 3/8" Pipe Size, 5/8" tube size
Brand: IWS
Air Brake Compression 90° Male NPT Connector, 3/8" Pipe Size, 5/8" tube size | *$12.16 |
 | Air Brake Compression Male NPT Branch Tee, 3/8" Pipe Size, 1/2" tube size
Brand: IWS
Air Brake Compression Male NPT Branch Tee, 3/8" Pipe Size, 1/2" tube size | *$10.49 |
| Air Brake Compression Male NPT Branch Tee, 1/2" Pipe Size, 3/4" tube size
Brand: IWS
Air Brake Compression Male NPT Branch Tee, 1/2" Pipe Size, 3/4" tube size | *$40.00 |
 | SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-12, Length 36"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-12, Length 36" | *$114.91 |
 | Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 3/4" ID, Pack of 17 | *$1.08 |
 | W/B/M Pre Hntr 12ga IC
Brand: Trulock Part Number: 57359
Precision Hunter Choke, Improved Cylidnerbr /br /The Precision hunter style chokes are extended, knurled and notched for use with a choke wrench. They are manufactured from high strength 17-4 PH stainless steel with an extremely smooth interior finish. They are suitable for use with steel shot from cylinder through improved modified. All chokes are marked on the head with the degree of choke and on the body with the exit diameter. There is no difference between the Precision Hunter and the Sporting Clay chokes except for the low glare black oxide finish. High quality, low maintenance, known constrictions and a reasonable price!br /br /- Fits: Winchester/Browning/Mossberg 12gabr /- Extendedbr /- Constriction: .720 | *$38.49 |
| | Air Brake Compression Sleeve, 5/8" Tube size
Brand: IWS
Air Brake Compression Sleeve, 5/8" Tube size | *$1.06 |
 | W/B/M Pattern Plus 12ga XFull
Brand: Trulock Part Number: 57464
Pattern Plus Choke, X-Fullbr /br /Pattern Plus style choke tubes fit flush with the end of the barrel. They are manufactured from high strength 17-4 PH stainless steel and are marked on the body with the degree of choke as well as the exit diameter. They are the choice for those shooters who want a high quality choke tube but prefer a flush mount style.br /br /- Fits: Winchester/Browning/Mossberg 12gabr /- Flushbr /- Constriction: .690 | *$19.24 |
 | Rem Pre Hntr 16 GA Skeet
Brand: Trulock Part Number: 57272
Precision Hunter Choke,Skeetbr /br /The Precision hunter style chokes are extended, knurled and notched for use with a choke wrench. They are manufactured from high strength 17-4 PH stainless steel with an extremely smooth interior finish. They are suitable for use with steel shot from cylinder through improved modified. All chokes are marked on the head with the degree of choke and on the body with the exit diameter. There is no difference between the Precision Hunter and the Sporting Clay chokes except for the low glare black oxide finish. High quality, low maintenance, known constrictions and a reasonable price!br /br /- Fits: Remignton 16gabr /- Extendedbr /- Constriction: .665 | *$38.49 |
 | W/B/M Pre Hntr 12ga Mod
Brand: Trulock Part Number: 57355
Precision Hunter Choke, Modifiedbr /br /The Precision hunter style chokes are extended, knurled and notched for use with a choke wrench. They are manufactured from high strength 17-4 PH stainless steel with an extremely smooth interior finish. They are suitable for use with steel shot from cylinder through improved modified. All chokes are marked on the head with the degree of choke and on the body with the exit diameter. There is no difference between the Precision Hunter and the Sporting Clay chokes except for the low glare black oxide finish. High quality, low maintenance, known constrictions and a reasonable price!br /br /- Fits: Winchester/Browning/Mossberg 12gabr /- Extendedbr /- Constriction: .710 | *$38.49 |
 | Lion Cross Tube Welded Cylinder - 3000 PSI, 2in. Bore, 8in. Stroke
Brand: Lion1000
This heavy-duty Lion welded cross tube cylinder features an advanced, corrosion-resistant rod and is designed and built to perform in applications up to 3000 PSI and 6000 PSI proof pressure. It features a Lion 1000 corrosion-resistant chrome rod, premium high-pressure seal kit, sealant-free and user-friendly ORB ports, durable ductile iron piston and heavy-duty cast steel ends. 7-year corrosion warranty on rod. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 8, Closed Pin Center (in.): 18.25, Shaft Diameter (in.): 1.12 | *$139.99 |
 | Koshin 1.5" Water Pump with Honda GXH50 Engine
Brand: enginepoweredpumps.com Model: epp_SEH-40H Part Number: epp_SEH-40H
The Koshin 1.5" aluminum die cast Centrifugal Water Pump (SEH-40H) combines with a Honda GXH50 4-stroke, single cylinder gas engine to handle use with clean water, silt water, abrasive water, muddy water, septic tanks and slow seepage. The lightweight design of this Koshin-Honda assembly makes this pump easily portable from job to job, as it only weighs 25 lbs. This high-pressure water pump is especially ideal for firefighting tasks. Having this portable high-pressure water pump handy when a grass fire, bush fire or other out-of-control fires occur will help to control the spreading of the fire. You will be able to pump directly from a pond and ensure high pressure when battling fires.
This high pressure water pump comes with a strainer. | *$952.29 |
| Lion Cross Tube Welded Cylinder - 3000 PSI, 3in. Bore, 20in. Stroke
Brand: Lion1000
This heavy-duty Lion welded cross tube cylinder features an advanced, corrosion-resistant rod and is designed and built to perform in applications up to 3000 PSI and 6000 PSI proof pressure. It features a Lion 1000 corrosion-resistant chrome rod, premium high-pressure seal kit, sealant-free and user-friendly ORB ports, durable ductile iron piston and heavy-duty cast steel ends. 7-year corrosion warranty on rod. Max. PSI: 3,000, Bore Diameter (in.): 3, Stroke Length (in.): 20, Closed Pin Center (in.): 30.25, Shaft Diameter (in.): 1.5 | *$209.99 |
 | Brand Hydraulics Spring Centered Work Section, Model# 20BFT4SB
Brand: Brand Hydraulics
This Brand Hydraulics work section has a 4-way, 3-position tandem center. U.S.A. | *$84.99 |
| Lion Cross Tube Welded Cylinder - 3000 PSI, 3in. Bore, 16in. Stroke
Brand: Lion1000
This heavy-duty Lion welded cross tube cylinder features an advanced, corrosion-resistant rod and is designed and built to perform in applications up to 3000 PSI and 6000 PSI proof pressure. It features a Lion 1000 corrosion-resistant chrome rod, premium high-pressure seal kit, sealant-free and user-friendly ORB ports, durable ductile iron piston and heavy-duty cast steel ends. 7-year corrosion warranty on rod. Max. PSI: 3,000, Bore Diameter (in.): 3, Stroke Length (in.): 16, Closed Pin Center (in.): 26.25, Shaft Diameter (in.): 1.5 | *$179.99 |
 | Kodiak 2" Water Transfer Pump with Honda GX120 OHV Engine
Brand: enginepoweredpumps.com Model: epp_PWP2HX Part Number: epp_PWP2HX
This Kodiak 2" Water Transfer Pump combines with a 4.0 HP Honda GX120 OHV engine so it is useful for large watering jobs or for emergencies like pumping out basements. You can hook up this water transfer pump to a tank or a creek / pond to pull water out. You will need a non-collapsible hose for the suction (preferably a 2" ID hose).
This Kodiak-Honda assembly features an aluminum pump body and can handle solids up to 1/4" (7 mm) in diameter. | *$564.46 |
 | Lion Cross Tube Welded Cylinder - 3000 PSI, 4in. Bore, 24in. Stroke
Brand: Lion1000
This heavy-duty Lion welded cross tube cylinder features an advanced, corrosion-resistant rod and is designed and built to perform in applications up to 3000 PSI and 6000 PSI proof pressure. It features a Lion 1000 corrosion-resistant chrome rod, premium high-pressure seal kit, sealant-free and user-friendly ORB ports, durable ductile iron piston and heavy-duty cast steel ends. 7-year corrosion warranty on rod. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 24, Closed Pin Center (in.): 34.25, Shaft Diameter (in.): 1.75 | *$249.99 |
 | 1/8 NPT, 1.13 OAL, Parker Exhaust Mufflers (1 Each)
Brand: Reid Supply Company Part Number: MFP-200
Exhaust Port Mufflers | *$8.80 |
 | 1/4 NPT Ports, 1. Inlet, 8 Port, w/Solid Plug in center, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-09
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$52.46 |
 | 1/8 NPT Port, 5/32 Pilot Port, Parker Blocking Valves w/Threaded Connection (1 Each)
Brand: Reid Supply Company Part Number: MFP-487
Blocking Valves w/Threaded Connection - Blocking valves are designed for precise repeatable stopping of moving cylinders or to maintain the position of a cylinder in the event of an air pilot signal loss. Blockers are used for positioning, jogging, and safety purposes. Operating pressure is 0 -150 psi with a temperature range of 5°F to 140°F. Maximum operating frequency is 10 Hz with a life expectancy of 10 million cycles at 90 psi, 68°F, dry air and 1 Hz operating frequency. | *$79.33 |
 | 3/8 NPT Ports, 1. Inlet, 4 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-303
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$64.57 |
 | 2. Bore x 3. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-29
Front Nose Mount - Double Acting | *$81.13 |
 | Manual Operated, Button Style - Two Position, Parker Directional Control Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-391
Button Style - Two Position | *$93.59 |
 | De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A=3.268, B=.866, C=M10 (1 Each)
Brand: De-Sta-Co Part Number: 031-S-2400
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$50.50 |
 | 1 1/4 Bore x 8. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-88
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$70.70 |
 | Enerpac Hydraulic Power Workholding No. STRD121, Light Duty, Double Acting, Threaded, w/o Arm (1 Each)
Brand: Enerpac Part Number: STRD-121
Hydraulic Power Workholding - Light Duty - These swing cylinders rotate 90° as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$398.00 |
 | 1/4 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-221
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$68.35 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9381ST (1 Each)
Brand: Enerpac Part Number: CST-9381
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$125.00 |
 | 7/16 Bore x 3. Stroke, Double Acting - Front Block Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-54
Front Block Mount - Double Acting | *$40.16 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-51, Use w/cap.=1,250 lbs. (1 Each)
Brand: Enerpac Part Number: CAS-51
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$44.00 |
 | 1 1/4 Bore x 2. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-175
1-1/4" Bore Stud Mount Double Acting | *$34.34 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C=3.651, O=5/16-24 (1 Each)
Brand: De-Sta-Co Part Number: 090-012-224 | *$290.92 |
| 3/8 NPT Ports, 1. Inlet, 16 Port, 1.75 Hex. x 19. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-218
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$91.93 |
 | 3. Bore x 2. Stroke, Double Acting - Low Profile, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-243
Low Profile - Parker low profile cylinders are designed to meet the demands for saving space. The cylinder body is made of heavy wall aluminum alloy. The tube ID coating has extreme hardness, excellent wear, seizure resistance, low coefficient of friction and high corrosion resistance. The piston rod is made of high strength steel, hard chrome plated for smooth performance, and extended seal wear. The piston seal and the piston rod seal are made of Buna-N material for positive sealing. Maximum operating pressure 250 psi with an operating temperature range of -10°F to 165°F. Other sizes are available as special order. Please call for price and delivery. | *$180.80 |
| 1/4 NPT Ports, 3/4 Inlet, 8 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-206
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$66.01 |
 | 7/16-20 Thd., Rod Clevis Assemblies, Use w/Bore Size 1 1/2 (1 Each)
Brand: Reid Supply Company Part Number: PAC-660
Rod Clevis Assemblies | *$6.95 |
 | 1/4 NPT Port, 14 SCFM Flow, 2-120 Spring Range, ARO Precision Air Regulators (1 Each)
Brand: Reid Supply Company Part Number: ARO-5
Precision Air Regulators - High precision multi-stage pressure regulators. Controls output pressure with an accuracy of 0.1%, and very low sensitivity to changes in supply pressure and flow. High degree of regulation and repeatability are achievable by reacting to down stream pressure fluctuations as small as 0.01 psi above set pressure. Movement as small as 0.0001 inches will cause main valve to correct to the proper position. At start up, regulated pressure will return to its output setting, even after long down times. Maximum pressure 150 psi. Temperature rating 20°F to 150°F. | *$106.19 |
| 5/16-24 Thd., Rod Clevis Assemblies, Use w/Bore Size 1 1/16 (1 Each)
Brand: Reid Supply Company Part Number: PAC-640
Rod Clevis Assemblies | *$4.58 |
| 7/8 Bore x 1. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-11
Front Nose Mount - Double Acting | *$26.63 |
 | 1/4 NPT Ports, 1. NPT Inlet, 8 Port, 2.25 W x 18.75 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-440
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$77.59 |
 | 3/8 NPT Ports, 3/4 Inlet, 4 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Red (1 Each)
Brand: Reid Supply Company Part Number: NM-401
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$62.17 |
 | Spring Operated, Pedal Style - Two Position, Parker Directional Control Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-392
Pedal Style - Two Position | *$112.93 |
| 1 1/2 Bore x 4. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-25
Front Nose Mount - Double Acting | *$56.97 |
 | 1/4 NPT Ports, 3/8 NPT Inlet, 6 Port, 1.25 W x 5.88 Lg., Aluminum Double Sided Ports - 90° Manifolds, Black
Brand: Reid Supply Company Part Number: MM-710
Double Sided Ports - 90° | *$22.62 |
 | 1/4 NPT Ports, 120 V AC, Two Position Double Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-427
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$134.96 |
 | 3/8 NPT Ports, 120 V AC, Two Position Double Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-431
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$140.13 |
| 1 1/2 Bore x 6. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-104
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$72.94 |
| 1 1/4 Bore x 4. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-185
1-1/4" Bore Stud Mount Double Acting | *$38.96 |
|
|
|
|
|
| eBay Results |
|---|
| | Title | Price | Shipping | Total | Currency | Time Left |
|---|
 | Air Motor, 14.2 in-lbs Torque, 2.362" (60 mm) Diameter | 1236.92 | 0.00 | 1236.92 | USD | 33 minutes 9 seconds |  | Air Motor, 80.5 in-lbs Torque, 2.362" (60 mm) Diameter | 1302.02 | 0.00 | 1302.02 | USD | 47 minutes 36 seconds |  | Parker Hydraulic, D1VW6CNYCF5, New | 259.99 | 0.00 | 259.99 | USD | |  | Parker Hydraulic, D1VW4CNYCF, New | 225.99 | 0.00 | 225.99 | USD | 50 minutes 30 seconds |  | Parker Hydraulic, FM2DDKN, New | 145.99 | 0.00 | 145.99 | USD | 52 minutes 43 seconds |  | Parker Hydraulic, PRM2PP25KN, New | 149.99 | 0.00 | 149.99 | USD | 54 minutes 51 seconds |  | Parker Hydraulic, CPOM2DD, New | 149.99 | 0.00 | 149.99 | USD | 57 minutes 52 seconds |  | Air Motor, 129.2 in-lbs Torque, 2.362" (60 mm) Diameter | 1334.57 | 0.00 | 1334.57 | USD | 1 hour 2 minutes 48 seconds |  | Parker Pneumatic, 1.12USL1603.0, Air cylinder, New | 29.99 | 0.00 | 29.99 | USD | 1 hour 5 minutes 50 seconds |  | 1x used SMC Pneumatic Air Slide 20-MGQL20-20-Y59A | 34.99 | 0.00 | 34.99 | USD | 1 hour 15 minutes 59 seconds |  | Air Motor, 515.1 in-lbs Torque, 2.362" (60 mm) Diameter | 1367.12 | 0.00 | 1367.12 | USD | 1 hour 19 minutes 1 second |  | 120VAC 3-WAY GENERAL PURPOSE SOLENOID VALVE | 18.00 | 4.00 | 22.00 | USD | 1 hour 21 minutes 30 seconds |  | ROSS 2783A6006 L-O-X 3/2 LOCK-OUT & EXHAUST VALVE NEW | 27.05 | 0.00 | 27.05 | USD | 1 hour 22 minutes 54 seconds |  | ROSS 2783A6006 L-O-X 3/2 LOCK-OUT & EXHAUST VALVE NEW | 27.05 | 0.00 | 27.05 | USD | 1 hour 22 minutes 56 seconds |  | 1 LHA SUCTION STRAINER SEH-50-2-100-RV3 | 40.00 | 8.95 | 48.95 | USD | 1 hour 28 minutes 11 seconds |  | Air Motor, 1030.2 in-lbs Torque, 2.362" Diameter | 1399.67 | 0.00 | 1399.67 | USD | 1 hour 33 minutes 9 seconds |  | NEW VICKERS HYDRAULIC DIRECTIONAL VALVE DG5S4 DGMFN | 325.00 | 0.00 | 325.00 | USD | 1 hour 41 minutes 56 seconds |  | Welded Tee Cylinder 2500 PSI, 3"Bore, 20"Stroke, 1.5" | 219.99 | 23.04 | 243.03 | USD | 1 hour 42 minutes 57 seconds |  | DURCO 1-1/2" STEEL PLUG VALVE WITH AUTOMAX ACTUATOR | 225.00 | 0.00 | 225.00 | USD | 1 hour 43 minutes 31 seconds |  | Air Motor, 21.2 in-lbs Torque, 3.150" (80 mm) Diameter | 1660.08 | 0.00 | 1660.08 | USD | 1 hour 47 minutes 33 seconds |  | Murata Z06-39292-81 Speed Elbows (5) SMC AS1201F-M5-04 | 28.90 | 0.00 | 28.90 | USD | 1 hour 48 minutes 20 seconds |  | MTA Compressed Air Dryer 2003 | 200.00 | 0.00 | 200.00 | USD | 1 hour 57 minutes 3 seconds |  | GATES Female JIC 37ยบ Flare Swivel G-20 Series Coupling | 8.95 | 10.65 | 19.60 | USD | 1 hour 59 minutes 30 seconds |  | New Enerpac SCR 102H 10 Ton Pump And Cylindr Set | 620.00 | 99.00 | 719.00 | USD | 1 hour 59 minutes 37 seconds |  | Air Motor, 71.7 in-lbs Torque, 3.150" (80 mm) Diameter | 1692.62 | 0.00 | 1692.62 | USD | 2 hours 1 minute 11 seconds |  | ACE MC 3350-1 SHOCK ABSORBER MC3350-1 NEW in BOX | 44.37 | 0.00 | 44.37 | USD | 2 hours 6 minutes 23 seconds |  | Lot 25 Stainless Hydraulic Pressure Vent Plugs, 5/8-18 | 14.99 | 4.95 | 19.94 | USD | 2 hours 6 minutes 53 seconds |  | Parker Fluid Power Hydrolic Cylinder 1.5 bore 10" strok | 18.99 | 0.00 | 18.99 | USD | 2 hours 7 minutes 33 seconds |  | PHD SDD13X6-AE-AR-E Pneumatic Slide + Cylinder ! WOW ! | 39.99 | 0.00 | 39.99 | USD | 2 hours 9 minutes 43 seconds |  | 26pc Vickers Cylinder Mounting Parts NEW | 17.00 | 0.00 | 17.00 | USD | 2 hours 12 minutes 18 seconds |  | Air Motor, 143.4 in-lbs Torque, 3.150" (80 mm) Diameter | 1725.18 | 0.00 | 1725.18 | USD | 2 hours 13 minutes 58 seconds |  | NUMATICS R30R-04G REGULATOR VALVE w. GAUGE New Surplus | 31.96 | 0.00 | 31.96 | USD | 2 hours 15 minutes 15 seconds |  | SMC MX525-30 + CV-09016502 Pneumatic Slide ! WOW ! | 29.99 | 0.00 | 29.99 | USD | 2 hours 17 minutes 39 seconds |  | Sun Hydraulics RPEE-LAN Piston Relief Valve | 44.00 | 9.00 | 53.00 | USD | 2 hours 18 minutes 38 seconds |  | SMC CDM2U32-50A-C73-XC8 CYLINDER 145 PSI ~ NEW | 39.96 | 0.00 | 39.96 | USD | |  | SMC XTO-1239-04 PILOT CHECK VALVE ~ New Surplus | 26.22 | 0.00 | 26.22 | USD | 2 hours 21 minutes 11 seconds |  | 2pc Elon College Air Check Valve 8830E6 NEW | 100.00 | 0.00 | 100.00 | USD | 2 hours 23 minutes 42 seconds |  | Air Motor, 191.2 in-lbs Torque, 3.150" (80 mm) Diameter | 1757.72 | 0.00 | 1757.72 | USD | 2 hours 24 minutes 57 seconds |  | SMC NCDGBN25-0600-G5PL Pneumatic Cylinder ! WOW ! | 59.99 | 0.00 | 59.99 | USD | 2 hours 26 minutes 28 seconds |  | New Rexroth C4I 3 Way Bistable Ball Valve, 5352600100 | 18.00 | 0.00 | 18.00 | USD | 2 hours 27 minutes 58 seconds |  | Deltrol EC10B Check Valve 10120-73 MX Needle EC-10-B | 16.99 | 4.80 | 21.79 | USD | 2 hours 29 minutes 24 seconds |  | Deltrol EC20SS Stainless Steel 1/4" Check Valve 1012076 | 34.99 | 5.00 | 39.99 | USD | 2 hours 29 minutes 34 seconds |  | Deltrol EV125A Quick Exhaust Valve 10135-67 EV-125A | 14.99 | 4.80 | 19.79 | USD | 2 hours 29 minutes 52 seconds |  | Deltrol N10B Needle Valve EN10B Pneu-Trol N-10-B Check | 7.49 | 4.80 | 12.29 | USD | 2 hours 30 minutes 1 second |  | Detrol EF25B Flow Control Valve Needle 3/8" NPT Brass | 21.99 | 5.00 | 26.99 | USD | 2 hours 30 minutes 11 seconds |  | NEW HONEYWELL SKINNER 734 19AN2NN00N0C111P3 VALVE 120 V | 60.00 | 0.00 | 60.00 | USD | 2 hours 30 minutes 40 seconds |  | Hystar Hydraulic Directional Valve D03 110 Volt Tandem | 115.00 | 0.00 | 115.00 | USD | 2 hours 32 minutes 53 seconds |  | Prince Manufacturing Hydraulic Cylinder PMC-8324 3x24 | 206.00 | 0.00 | 206.00 | USD | 2 hours 32 minutes 58 seconds |  | Prince Manufacturing Hydraulic Cylinder PMC-5624 4x24 | 323.00 | 0.00 | 323.00 | USD | |  | Prince Manufacturing Hydraulic Cylinder PMC-5524 3.5x24 | 270.00 | 0.00 | 270.00 | USD | 2 hours 33 minutes 1 second | |
|