 | H2S/S , FHK Series Hydraulic, Stainless Steel Socket, 1/4 in. Female Pipe
Brand: Foster Manufacturing | *$28.28 |
 | Atlas Copco Hydraulic Pick Hammer 7/8 X 3 1/4 #335109
Brand: Atlas Part Number: 335109
Ideal for horizontal work in brick, mortar, and light concrete; Popular choice for renovation, demolition, and structural alteration jobs; Delivers up to 2400 BPM; 5.3 GPM; 1000-1300 PSI working pressure; Vibration level 10.1 (ISO 8662-5); Uses 7/8" Hex shank steel | *$1,298.40 |
| H1S , FHK Series Hydraulic, Steel Socket, 1/8 in. Female Pipe
Brand: Foster Manufacturing | *$10.08 |
 | IMPERIAL 97362 QUICK DISCONNECT COUPLER PLUG 3/8"x3/8"MNPT(PACK OF 2)
Brand: Imperial Model: 97362 Part Number: 97362
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 3/8"
Male NPT: 3/8"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Male Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$6.69 |
 | CM COLUMBUS MCKINNON 664021 "HAMMERLOK" COUPLING LINK 7/32"
Brand: Columbus McKinnon Model: 664021 Part Number: 664021
"HAMMERLOK" COUPLING LINK
The Hammerlok now features a new pin design with a flared split tube. The tube has a single wall flared at both ends with a split down the center giving the appearance of a C when viewed from the side. The split retainer is a reliable user-friendly device for securing the load pin. There is no change to fit, form, or function of the Hammerlok.
Highlights:
Permits fast assembly.
Attaches chain to masterlinks and eye type hooks.
Also used for installing new body chain in used slings.
Chain Size: 7/32"
Working Load Limit: 2,100 Lbs. | *$26.99 |
 | 10 Ton Foot Air/ Hydraulic Porta Power Pump
Brand: Unknown Part Number: 50622
10 Ton Foot Air/ Hydraulic Pump. Use this pump with 4 or 10 ton Porta Power Units. This pump works for standard and long ram hydraulics * Rated pressure: 10, 000 psi * Air pressure: 70-170 psi * Stroke length: 1" * Oil flow at 100 psi air pressure: 30 cu. in/Min. * Usable oil capacity: 42 cu. in. (690 c.c) * Air consumption: 10 CFM * Air inlet thread NPT: 1/4" * Includes 6" hydraulic hose with fittings | *$187.99 |
 | 18755 Turbo Ii Pump w/4-way Manual Valve (277-PAMG-1402N) Category: Hydraulic Pumps
Brand: Enerpac Part Number: 277-PAMG-1402N
Item #: 277-PAMG-1402N. High efficiency fully serviceable cast aluminum air motor for increased life and reduced air consumptionbrOperating air pressure 25 - 125 psi enables pump to start at low pressurebrReturn-to-tank port for use in remote valve applicationsbrInternal pressure relief valve provides overload protection pulliUsed With = Double-Acting CylinderliUseable Oil Cap. = 127.0 cu in [Max]liOperating Pressure = 10000.0 psi [Max]liFlow = 60.0 cu. in./min [Min], 10.0 cu. in./min [Max]liCurrent @ Air Pressure Range = 25 psi [Min], 125 psi [Max]liAir Consumption = 12 SCFMliSound Level = 76 dBliWt. = 24 lb/ul brCustomers also search for: Discount 18755 Turbo Ii Pump w/4-way Manual Valve, Buy 18755 Turbo Ii Pump w/4-way Manual Valve, Wholesale 18755 Turbo Ii Pump w/4-way Manual Valve, 662005118755, PAMG-1402N, Hydraulic Pumps | *$1,143.76 |
 | Watts Water Technologies WP15P-08PB Poly Pex Coupling
Brand: Watts Water Technologies Part Number: WP15P-08PB
Used for making WaterPEX repairs in the field, continuing a run as well as transitioning from polybutylene pipe to WaterPEX tubing. No. 15P 08: 1 2'' CF x 1 2'' CF No. WP15P 08PB: 10 pack, 1 2'' CF x 1 2'' CF No. 15P 1208: 3 4'' CF x 1 2'' CF No. 15P 12: 3 4'' CF x 3 4'' CF No. WP15P 12PB: 10 pack, 3 4'' CF x 3 4'' CF No. 15P 1612: 1'' CF x 3 4'' CF No. WP15P 1612PB: 10 pack, 3 4'' CF x 1'' CF No. 15P 16: 1'' CF x 1'' CF No. WP15P 16PB: 10 pack, 1'' CF x 1'' CF | *$5.16 |
 | Hydraulic Swivel Hose Fitting, 1/2"
Brand: Gates Part Number: G252350808
Gates G25235-0808 MEGACRIMP COUPLI | *$17.00 |
 | K2S-101 , FHK Series Hydraulic, Steel Plug, 1/4 in. Female Pipe w/ Viton Seals
Brand: Foster Manufacturing | *$6.40 |
 | Apache Hose Belting, Inc. 98398220 Universal Hydraulic Hose
Brand: Apache Hose Part Number: 98398220
Assemblies. 2 wire. Assemblies: Hose and couplings meet 100R2AT specification. 3 8" I.D.: 4000 P.S.I. (W.P.), 16,0000 P.S.I. burst, 5.12" minimum bend radius, coupled 3 8" MNPT on each end. 1 2" I.D.: 3500 P.S.I. (W.P.), 14,000 P.S.I. burst, 7.09" minimum | *$6.96 |
| | IMPERIAL 99472 FLAT FACE STRAIGHT THREAD O-RING 90° ELBOW FITTING 3/8X1/2(PACK OF 2)
Brand: Imperial Model: 99472 Part Number: 99472
"IMPERIAL" O-RING 90° ELBOW FITTING
Port Thread: 1/2"
Material: 12L14 steel.
Sealing Method: O-Ring.
Tube Outside Diameter: 3/8"
For-Seal Thread Size: 11/1616
Cross Reference: 4515 x 6 x 8
Excellent vibration resistance.
Maximum operating presure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing.
Flat Face O-Ring Straight Thread O-Ring 90° Elbow Fitting (Reference SAE No. 520220). | *$32.79 |
 | SEPTLS655UN1719 - Universal Plus Sorbents
Brand: SPC Part Number: 655-UN1719
Universal Plus Sorbents | *$111.89 |
| K8S , FHK Series Hydraulic, Steel Plug, 1 in. Female Pipe
Brand: Foster Manufacturing | *$20.48 |
 | Current Tools 1523 1/4" x 3' Hydraulic Hose
Brand: Current Tools Part Number: 1523
1523 1/4" x 3' Hydraulic Hose. Unique stainless steel and aluminum construction for light weight and rugged use. Operates in any position. 6,500 psi ( max ) pressure. For use ONLY with Hydraulic Knockout Sets Cable Cutters. | *$28.95 |
 | Watts Water Technologies 15P-1612 Poly Pex Coupling
Brand: Watts Water Technologies Part Number: 15P-1612
Used for making WaterPEX repairs in the field, continuing a run as well as transitioning from polybutylene pipe to WaterPEX tubing. No. 15P 08: 1 2'' CF x 1 2'' CF No. WP15P 08PB: 10 pack, 1 2'' CF x 1 2'' CF No. 15P 1208: 3 4'' CF x 1 2'' CF No. 15P 12: 3 4'' CF x 3 4'' CF No. WP15P 12PB: 10 pack, 3 4'' CF x 3 4'' CF No. 15P 1612: 1'' CF x 3 4'' CF No. WP15P 1612PB: 10 pack, 3 4'' CF x 1'' CF No. 15P 16: 1'' CF x 1'' CF No. WP15P 16PB: 10 pack, 1'' CF x 1'' CF | *$1.72 |
 | Buyers Extra Element for Northern Filter Item# 4022, Model# U3L3FE
Brand: Northern Tool Equipment
Extra element for Buyers 50 GPM return line filter Item #4022, sold separately. | *$19.99 |
| K4B , FHK Series Hydraulic, Brass Plug, 1/2 in. Female Pipe
Brand: Foster Manufacturing | *$9.44 |
 | Hydraulic Hose 3/8-INX36-IN
Brand: Apache Hose Part Number: 98398232
Temperature range -40 to 200 farenheit; Working pressure 4000 lbs.; Coupled with solid male ends | *$9.51 |
 | Watts Water Technologies WP15B-1212PB Pex Brass Coupling
Brand: Watts Water Technologies Model: WP15B-1212PB Part Number: WP15B-1212PB
For polyethylene (PEX) crimp system. For hot or cold water applications. Copper crimp rings not included. Bagged. No. P 300: 3 8'' barb x 3 8'' barb No. P 517: 3 8'' barb x 1 2'' barb No. P 500: 1 2'' barb x 1 2'' barb No. WP15B 0808PB: 10 pack, 1 2'' barb No. P 701: 3 4'' barb x 1 2'' barb No. P 700: 3 4'' barb x 3 4'' barb No. WP15B 1212PB: 10 pack, 3 4'' barb No. 15B 1612: 1'' barb x 3 4'' barb No. 15B 1616: 1'' barb x 1'' barb | *$7.83 |
| K6S/S , FHK Series Hydraulic, Stainless Steel Plug, 3/4 in. Female Pipe
Brand: Foster Manufacturing | *$42.53 |
 | Westward 1MZJ7 Hydraulic Bench Shop Press, 12 Tons
Brand: WestWard Tools
Hydraulic Bench Shop Press, Frame Capacity 12 Tons, Ram Travel 6 In, Hose Size 1/4 In Inner Diameter x 6 Inches, Base Length 16 1/8 In, Base Width 21 1/4 In, Pump Type Hand Pump, Working Width 7 1/8 In, Overall Height 31 1/2 In, Compact Bench Press with 3 1/4 To 16 7/8 In Range of Working Space, Includes Hydraulic Hand Pump, Cylinder, and Hose | *$757.63 |
 | Jet Equipment Hydraulic Press 35 Ton HP-35A #331431
Brand: Jet Equipment Part Number: 331431
For pressing, bending and straightening operations; Easy-to-use, hand-operated with pressure gauge for direct pressure readings; Tables raise and lower easily with use of hand crank; Side frames are open for inserting long material; Fast setup ram extension screw; Ram moves laterally for added versatility | *$2,799.00 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-12-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.73 cu. in./rev. | *$175.99 |
 | Current Tools 1521 Hydraulic Hand Pump
Brand: Current Tools Part Number: 1521
1521 Hydraulic Hand Pump. Unique stainless steel and aluminum construction for light weight and rugged use. Operates in any position. 6,500 psi ( max ) pressure. For use ONLY with Hydraulic Knockout Sets Cable Cutters. | *$273.00 |
 | AF15-06 , ISO A Series, Hydraulic, 2-Way Shut-Off, Socket, 3/8 in. Female Pipe Thread
Brand: Foster Manufacturing | *$20.80 |
 | Watts Water Technologies WP11B-0808PB Brass Sweat Adapter Coupling
Brand: Watts Water Technologies Part Number: WP11B-0808PB
Sweat adapters onto a copper pipe to transition to WaterPEX supply lines. No. P 513: 1 2'' Male sweat x 1 2'' CFX No. P 713: 3 4'' Male sweat x 3 4'' CFX No. P 518: 1 2'' Female sweat x 1 2'' CFX No. WP11B 0808PB: 10 pack, 1 2'' Female sweat x 1 2'' CFX No. P 718: 3 4'' Female sweat x 3 4'' CFX No. WPP11B 1212PB: 10 pack, 3 4'' Female sweat x 3 4'' CFX | *$11.78 |
| K1S , FHK Series Hydraulic, Steel Plug, 1/8 in. Female Pipe
Brand: Foster Manufacturing | *$3.84 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1 5/16-16 thds., Stroke=1.000 (1 Each)
Brand: De-Sta-Co Part Number: 010-211-004
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$137.49 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 26.4 GPM, 4500 PSI, 3-Position, Double Solenoid, Open Center Spool, 120 Volt AC Solenoids, Model# SWH-G03-C3-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with all-ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$139.99 |
 | IMPERIAL 97394 COUPLING BODY LOCK-ON HOSE BARB 1/4"x3/8" - INDUSTRIAL DESIGN (PACK OF 2)
Brand: Imperial Model: 97394 Part Number: 97394
"IMPERIAL" LOCK-ON HOSE BARB
Hose Style: 1/4"
Body Style: 3/8"
Barbed end.
Maximum Air Pressure: 300 psi
Stainless steel springs.
Corrosion resistant finish.
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air.
Heavy duty quick disconnect coupler body lock-on barb, industrial design. | *$35.19 |
 | Atlas Copco Hydraulic Breaker 1 1/8 X 6 #335107
Brand: Atlas Part Number: 335107
Heavy duty breaking in frozen soil, asphalt, and reinforced concrete; Delivers up to 1860 BPM; Adjustable from 7.9 GPM to 5.3 GPM; 1500-1800 PSI working pressure; Vibration level 11.4 (ISO 8662-5) | *$1,840.00 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-04-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. | *$175.99 |
 | Watts Water Technologies WP15B-0808PB Pex Brass Coupling
Brand: Watts Water Technologies Model: WP15B-0808PB Part Number: WP15B-0808PB
For polyethylene (PEX) crimp system. For hot or cold water applications. Copper crimp rings not included. Bagged. No. P 300: 3 8'' barb x 3 8'' barb No. P 517: 3 8'' barb x 1 2'' barb No. P 500: 1 2'' barb x 1 2'' barb No. WP15B 0808PB: 10 pack, 1 2'' barb No. P 701: 3 4'' barb x 1 2'' barb No. P 700: 3 4'' barb x 3 4'' barb No. WP15B 1212PB: 10 pack, 3 4'' barb No. 15B 1612: 1'' barb x 3 4'' barb No. 15B 1616: 1'' barb x 1'' barb | *$4.17 |
 | Elkhart Prod. Corp. 10170030 QTite Reducing Coupling Less Stop
Brand: Elkhart Part Number: 10170030
QTite, 3 4'' x 1 2'' reducing coupling, less stop. QTite fittings provide a clean and easy joining method that's designed to save time and money on installations, installing a joint is simple, requires no extra materials for copper and CPVC tubing installations , and a tube liner for PEX installations, no more solder, flux, heat, or special pressing tools needed. Results in lower costs, reduced labor time, and a clean and efficient installation process. | *$4.96 |
 | Air/Hydraulic Bottle Jack 32 Ton
Brand: Neiko Part Number: jac-b35-air
This All Purpose Hydraulic Jack Easily Handles Lift Jobs Up to 32 Tons Ideal For Auto Truck Repairs Moving Machinery Heavy Equipment *Min Height/Max Height :10-7/8" to 16-15/16" *Lifting Height:5-7/8" *Rubber Hose:48" *Connector Size:1/4" | *$249.94 |
 | Hydraulic Hose Fitting, 1/2"
Brand: Gates Part Number: G252000808
Gates G25200-0808 MEGACRIMP COUPLI | *$6.50 |
 | Watts Water Technologies 18B-161612 Brass PEX Tee
Brand: Watts Water Technologies Part Number: 18B-161612
For polyethylene (PEX) crimp system. For hot or cold water applications. Copper crimp rings not included. Bagged. No. P 340: 3 8'' CF x 3 8'' CF x 3 8'' CF No. P 542: 1 2'' CF x 1 2'' CF x 3 8'' CF No. P 540: 1 2'' CF x 1 2'' CF x 1 2'' CF No. WP 18B 08PB: 10 pack, 1 2'' CF No. P 543: 1 2'' CF x 1 2'' CF x 3 4'' CF No. QQT322XPK1: 1 2'' CF x 3 8'' CF x 3 8'' CF No. P 740: 3 4'' CF x 3 4'' CF x 3 4'' CF No. WP 18B 12PB: 10 pack, 3 4'' CF No. P 742: 3 4'' CF x 3 4'' CF x 1 2'' CF No. 18B 161212: 1'' CF x 3 4'' CF x 3 4'' CF No. 18B 161608: 1'' CF x 1'' CF x 1 2'' CF No. 18B 161612: 1'' CF x 1'' CF x 3 4'' CF No. 18B 16: 1'' CF x 1'' CF x 1'' CF | *$4.95 |
 | 110 Pieces Hydraulic Grease Fitting Assortment Set - SAE
Brand: Neiko
li30pcs straight 1/4-28 grease zerk fitting li20pcs straight 1/8" pipe grease zerk fitting li15pcs 45 degree 1/4-28 grease zerk fitting li15pcs 90 degree 1/4-28 grease zerk fitting li15pcs 90 degree zerk fitting 1/8" li15pcs 45 degree grease zerk fitting 1/8" | *$30.23 |
 | IMPERIAL 97373 HEAVY-DUTY QUICK DISCONNECT COUPLER SET - 1/4"
Brand: Imperial Model: 97373 Part Number: 97373
"IMPERIAL" QUICK DISCONNECT COUPLER SET
Body Style: 1/4"
Female NPT: 1/4"
Male NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
Contains both male plug Part No. 97382 and female coupler Part No. 97380.
Body Female Pipe Thread and Plug Male Pipe Thread, Automotive (Tru-Flate) Design.
For low pressure hydraulic, pneumatic, and fluid lines primarliy used for air or gas line applications. | *$16.99 |
| K6B , FHK Series Hydraulic, Brass Plug, 3/4 in. Female Pipe
Brand: Foster Manufacturing | *$14.40 |
| AF15-08 , ISO A Series, Hydraulic, 2-Way Shut-Off, Socket, 1/2 in. Female Pipe Thread
Brand: Foster Manufacturing | *$24.00 |
 | Apache Hose Belting, Inc. 39004200 Hydraulic Adapter
Brand: Apache Hose Part Number: 39004200
Male x Female. Swivel. No. 39004200: 1 4" Male x 1 4" Female No. 39004425: 3 4" Male x 1 2" Female No. 39004450: 3 4" Male x 3 4" Female | *$2.30 |
 | IMPERIAL 192040 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M12x12MM (PACK OF 5)
Brand: Imperial Model: 192040 Part Number: 192040
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
12MM tube x M12 X 1.5 metric thread - male connection. | *$201.99 |
 | Apache Hose Belting, Inc. 98398318 Universal Hydraulic Hose
Brand: Apache Hose Part Number: 98398318
Assemblies. 2 wire. Assemblies: Hose and couplings meet 100R2AT specification. 3 8'' I.D.: 4000 P.S.I. (W.P.), 16,0000 P.S.I. burst, 5.12'' minimum bend radius, coupled 3 8'' MNPT on each end. 1 2'' I.D.: 3500 P.S.I. (W.P.), 14,000 P.S.I. burst, 7.09'' minimum bend radius, coupled 1 2'' MNPT on each end. Temperature range: 40 F. to 212 F. ( 40 celcius to 100 celcius) Packaged: Coiled, sleeved, and labeled with I.D., length, specifications, and UPC bar code. No. 98398220: 3 8'' I.D. x 12'' No. 98398226: 3 8'' I.D. x 24'' No. 98398232: 3 8'' I.D. x 36'' No. 98398238: 3 8'' I.D. x 48'' No. 98398241: 3 8'' I.D. x 60'' No. 98398244: 3 8'' I.D. x 72'' No. 98398250: 3 8'' I.D. x 96'' No. 98398256: 3 8'' I.D. x 120'' No. 98398300: 1 2'' I.D. x 12'' No. 98398306: 1 2'' I.D. x 24'' No. 98398312: 1 2'' I.D. x 36'' No. 98398318: 1 2'' I.D. x 48'' No. 98398321: 1 2'' I.D. x 60'' No. 98398324: 1 2'' I.D. x 72'' No. 98398327: 1 2'' I.D. x 84'' No. 98398330: 1 2'' I.D. x 96'' No. 98398336: 1 2'' I.D. x 120'' No. 98398339: 1 2'' I.D. x 132'' No. 98398342: 1 2'' I.D. x 144'' | *$12.91 |
 | Breather Cap Assembly With Locking Tab
Brand: Northern Tool Equipment
Has locking tab. 1/4 turn chrome filler breather cap with chain. Also has one 15 micron strainer basket and one mounting flange with 2 gaskets. | *$14.99 |
 | 110 Pc Neiko SAE Hydraulic Grease Fitting Assortment
Brand: Neiko Part Number: RI-50463A | *$30.23 |
| Apache Hose Belting, Inc. 98398321 Universal Hydraulic Hose
Brand: Apache Hose Part Number: 98398321
Assemblies. 2 wire. Assemblies: Hose and couplings meet 100R2AT specification. 3 8" I.D.: 4000 P.S.I. (W.P.), 16,0000 P.S.I. burst, 5.12" minimum bend radius, coupled 3 8" MNPT on each end. 1 2" I.D.: 3500 P.S.I. (W.P.), 14,000 P.S.I. burst, 7.09" minimum | *$14.38 |
 | Watts Water Technologies 12B-1616 Brass Male Adapter (MIP)
Brand: Watts Water Technologies Part Number: 12B-1616
For polyethylene (PEX) crimp system. For hot or cold water applications. Copper crimp rings not included. Bagged. No. P 511: 3 8'' CFX x 1 2'' MPT No. P 510: 1 2'' CFX x 1 2'' MPT No. WP12B 0808PB: 10 pack, 1 2'' CFX x 1 2'' MP No. P 512: 1 2'' CFX x 3 4'' MPT No. P 711: 3 4'' CFX x 1 2'' MPT No. P 710: 3 4'' CFX x 3 4'' MPT No. WP12B 1212PB: 10 pack, 3 4'' CFX x 3 4'' MPT No. 12B 1612: 1'' barb x 3 4'' MPT No. 12B 1616: 1'' barb x 1'' MPT | *$2.34 |
| H8S , FHK Series Hydraulic, Steel Socket, 1 in. Female Pipe
Brand: Foster Manufacturing | *$45.76 |
