|
|
 | 7/8 Bore x 2. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-12
Front Nose Mount - Double Acting | *$28.90 |
 | Enerpac Hydraulic Power Workholding Work Support, Spring Advanced, No. WSL-111 (1 Each)
Brand: Enerpac Part Number: WSL-111
Work supports provide additional support to avoid excessive movement or deflection of the workpiece during machining. When hydraulic pressure is applied to the work support, a piston pushes against an internal adjustable spring that advances the work support plunger against a workpiece at the force set by the adjustable spring. As more hydraulic pressure is applied, an internal sleeve will grip and lock the plunger in that position. Available as a spring or fluid advance unit. The spring advanced unit can be converted to air by simply removing the internal adjustment spring and attaching a low pressure air line to the air breather vent tube. Operating pressure is 700 psi minimum, 5,000 psi maximum. | *$207.00 |
 | 2. Bore x 3. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-300
2" Bore Stud Mount Double Acting | *$59.69 |
 | 3/8 NPT Ports, 1/2 NPT Inlet, 4 Port, 1.50 W x 6.25 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-220
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$20.92 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-10-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.61 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.72 | *$175.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 3in. Bore, 16in. Stroke, 1 3/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 1 3/8 | *$179.99 |
 | 3/8 NPT Ports, 120 V AC, Three Position Double Closed Center Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-435
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$158.89 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-12-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91 | *$175.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 2 1/2in. Bore, 12in. Stroke, 1 3/8in. Shank, Model# PMC-5412
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 12, Closed Pin Center (in.): 20, Shaft Diameter (in.): 1 3/8 | *$159.99 |
 | 1 1/2 Bore x 4. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-225
1-1/2" Bore Stud Mount Double Acting | *$41.97 |
| 1 1/4 Bore x 2. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-17
Front Nose Mount - Double Acting | *$45.50 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C=2.441, O=5/16-24 (1 Each)
Brand: De-Sta-Co Part Number: 090-012-221 | *$236.62 |
 | Apache Hydraulic Hose - 3/4in. x 36in.L, 2-Wire, 3000 PSI
Brand: Apache Hose
This Apache hydraulic hose is designed for use with petroleum- and water-based hydraulic fluids. Can handle gasoline, diesel fuels, mineral oils, glycol, lubricating oils and more. Hose Diameter (in.): 3/4, Hose Fitting Size (in. NPT): 3/4, Hose Length (in.): 36, Working Pressure (PSI): 3,000 | *$18.99 |
 | 5/8 Bore x 1 1/2 Stroke, Double Acting, Universal Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-110
5/8" Bore Universal Mount Double Acting | *$19.71 |
| | Mueller Industries 521-364HC Coupling Black 1-1/4"x 3/4"
Brand: Mueller Model: 521-364HC Part Number: 521-364HC
"MUELLER" COUPLING
Reducing Coupling
Pipe Size : 1-1/4"x 3/4"
Connection : NPT
Material of Construction :Black Malleable Iron
WOG (PSI) : 300 At 150 Deg F
Saturated Steam Pressure : 150 PSI
Standards Class :150
ANSI B 16.39
Material Specification ASTM A-197 | *$10.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-25-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. Max. PSI: 2,900, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 7.19 | *$185.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 3 1/2in. Bore, 12in. Stroke, 1 3/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 12, Closed Pin Center (in.): 22 1/4, Shaft Diameter (in.): 1 3/8 | *$189.99 |
 | 3/8 NPT Ports, 1. Inlet, 4 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-203
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$64.57 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 3/4in. Shaft, Model# GP-F20-16-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. Max. PSI: 2,900, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.27 | *$185.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 12in. Stroke, 1 1/2in. Shaft, Model# PMC-8312
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 12, Closed Pin Center (in.): 20, Shaft Diameter (in.): 1 1/2 | *$174.99 |
 | SEPTLS655HT153 - High Traffic Sorbents
Brand: SPC Part Number: 655-HT153
Built for durability and high absorbency. This universal sorbent is tough enough for even your forklift traffic. Medium weight, double-perfed. | *$74.75 |
 | Clevis Mounting Brackets, Use w/Bore Size 2., 2 1/2 (1 Each)
Brand: Reid Supply Company Part Number: PAC-760
Clevis Mounting Brackets | *$11.26 |
 | 3/8 NPT, 1.50 OAL, Parker Exhaust Mufflers (1 Each)
Brand: Reid Supply Company Part Number: MFP-202
Exhaust Port Mufflers | *$11.67 |
| 3/8 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 19. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-213
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$81.69 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-20-P-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in/rev. Max. PSI: 2,900, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.73 | *$185.99 |
| 2. Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-290
2" Bore Stud Mount Double Acting | *$54.33 |
 | Slug-Out Hydraulic Knockout Sets Model Code: AA (part# KOF520)
Brand: Gardner Bender Part Number: KOF520
KOF520 Model Code: AA (part# KOF520) This item features: -Four point design allows slug to drop automatically without splitting. -Competitors punches and dies are interchangeable. -Cutting Thickness: 12 gauge (stainless steel) [Max], 10 gauge (mild steel) [Max]. -Price is for 1 Set. Model Code  Model Description AACutting Diam:1/2 in [Min], 2 in [Max], Includes:PF65 Foot Pump, (6) Punches 1/2 - 2 in, (6) Dies 1/2 - 2 in, Pull Rod for 3/4 - 4 in. Punches Dies, Stainless Steel Pull Rod, 3/8 in. Dia., Converter, 12 Ton Hydraulic Cylinder, 6 ft. Rubber Hose Coupler, Metal Case, Wt.:40 lb ABCutting Diam:1/2 in [Min], 2 in [Max], Includes:PH20 Hand Pump, (6) Punches 1/2 - 2 in, (6) Dies 1/2 - 2 in, Pull Rod for 3/4 - 4 in. Punches Dies, Stainless Steel Pull Rod, 3/8 in. Dia., Converter, 12 Ton Hydraulic Cylinder, 6 ft. Rubber Hose Coupler, Metal Case, Wt.:31 lb ACCutting Diam:1/2 in [Min], 4 in [Max], Includes:PF65 Foot Pump, (10) Punches 1/2 - 4 in, (10) Dies 1/2 - 4 in, Pull Rod for 3/4 - 4 in. Punches Dies, Stainless Steel Pull Rod, 3/8 in. Dia., Converter, 12 Ton Hydraulic Cylinder, 6 ft. Rubber Hose Coupler, Metal Case, Wt.:59 lb ADCutting Diam:1/2 in [Min], 4 in [Max], Includes:PH20 Hand Pump, (10) Punches 1/2 - 4 in, (10) Dies 1/2 - 4 in, Pull Rod for 3/4 - 4 in. Punches Dies, Stainless Steel Pull Rod, 3/8 in. Dia., Converter, 12 Ton Hydraulic Cylinder, 6 ft. Rubber Hose Coupler, Metal Case, Wt.:50 lb AEIncludes:PH20 Hand Pump, Pull Rod for 3/4 - 4 in. Punches Dies, Stainless Steel Pull Rod, 3/8 in. Dia., Converter, 12 Ton Hydraulic Cylinder, 6 ft. Rubber Hose Coupler, Metal Case, Wt.:27 lb | *$1,167.28 |
 | Apache Hydraulic Hose - 3/4in. x 30in.L, 2-Wire, 3000 PSI
Brand: Apache Hose
This Apache hydraulic hose is designed for use with petroleum- and water-based hydraulic fluids. Can handle gasoline, diesel fuels, mineral oils, glycol, lubricating oils and more. Hose Diameter (in.): 3/4, Hose Fitting Size (in. NPT): 3/4, Hose Length (in.): 30, Working Pressure (PSI): 3,000 | *$16.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 36in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 36, Closed Pin Center (in.): 46 1/4, Shaft Diameter (in.): 1 3/4 | *$319.99 |
 | 1/4 NPT Port, 29.5 SCFM Flow, ARO Check Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-500
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$18.43 |
| Prince Tie-Rod Cylinder - 3000 PSI, 2 1/2in. Bore, 12in. Stroke, 1 1/4in. Shaft
Brand: Northern Tool Equipment
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 12, Closed Pin Center (in.): 22 1/4, Shaft Diameter (in.): 1 1/4 | *$159.99 |
 | 90 Degree Free Swinging, Southco Fixed Installation Concealed Hinges, Stainless Steel (1 Each)
Brand: Southco Part Number: R6-21-23
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket. | *$9.30 |
 | 1/2 NPT, 2.31 Lg. Open, 7/8 Hex., Parker Muffler / Speed Controls (1 Each)
Brand: Reid Supply Company Part Number: MFP-332
Muffler/Speed Control | *$20.47 |
 | 3/8 NPT Port, 10-32 Pilot Port, Parker Blocking Valves w/Threaded Connection (1 Each)
Brand: Reid Supply Company Part Number: MFP-489
Blocking Valves w/Threaded Connection - Blocking valves are designed for precise repeatable stopping of moving cylinders or to maintain the position of a cylinder in the event of an air pilot signal loss. Blockers are used for positioning, jogging, and safety purposes. Operating pressure is 0 -150 psi with a temperature range of 5°F to 140°F. Maximum operating frequency is 10 Hz with a life expectancy of 10 million cycles at 90 psi, 68°F, dry air and 1 Hz operating frequency. | *$88.76 |
 | Enerpac Hydraulic Power Workholding Threaded Cylinder, Single Acting, No. WRT-21 (1 Each)
Brand: Enerpac Part Number: WRT-21
Cylinders can be fixtured into manual strap or bridge clamp assemblies. Fully threaded bodies allow cylinders to be threaded directly into tapped holes of the fixture for easy installation. Available as single-acting spring return or double acting hydraulic return. The VE-90 can use carbide grippers. | *$180.00 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-06-S9-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.35 | *$175.99 |
 | 5/8 Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-75
5/8" Bore Stud Mount Double Acting | *$16.67 |
| 1/8 NPT, 1.50 Lg. Open, 1/2 Hex., Parker Muffler / Speed Controls (1 Each)
Brand: Reid Supply Company Part Number: MFP-329
Muffler/Speed Control | *$13.19 |
 | Buyers Bolt Kit for Hydraulic Pump Mounting Bracket
Brand: Buyers
Use these to mount pump, engine and bracket. Bolts and lock-washers are included. To select the correct kit, match your bracket, engine and pump type. | *$5.99 |
 | 3/8 NPT, 3 Unit, Parker Combination FRL's (1 Each)
Brand: Reid Supply Company Part Number: MFP-352
Combination FRL'S | *$99.11 |
| Prince Tie-Rod Cylinder - 3000 PSI, 3in. Bore, 18in. Stroke, 1 3/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3, Stroke Length (in.): 18, Closed Pin Center (in.): 28 1/4, Shaft Diameter (in.): 1 3/8 | *$189.99 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-22, Use w/cap.=500 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-22
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$52.00 |
 | 1/4 NPT Ports, 120 V AC, Three Position Double Closed Center Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-433
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$153.69 |
 | 5/16 Bore x 1. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-62
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$29.96 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-53 (1 Each)
Brand: Enerpac Part Number: RW-53
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$236.00 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-20-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in./rev. Max. PSI: 2,900, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.73 | *$185.99 |
 | De-Sta-Co Hydraulic Accessory, Hydraulic Muffler, 3/8 NPT (1 Each)
Brand: De-Sta-Co Part Number: 70916 | *$66.05 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2129-5 (1 Each)
Brand: Enerpac Part Number: CY2129-5
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$366.00 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 3000 PSI, 2in. Bore, 8in. Stroke, Model 20TH08-112 ASAE
Brand: Lion 3000
Built tough for agricultural and industrial applications. 3000 PSI model is designed to withstand shock loads of up to 6000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Cylinder can be single or double acting. Attach one port for single and both ports for double acting. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/8 | *$109.99 |
 | SEPTLS5771236BASD - Torqueplus Protoblack 12-Point Combination Wrenches
Brand: Proto Part Number: 577-1236BASD
Torqueplus fastening system drives off fastener body, more easily removing damaged fasteners. Reduces risk of fastener rounding. Applies more torque to fastener. Unique arc design increases surface contact. Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury. Improves grip on worn, rounded fasteners. Shank is positioned at the center of box end, reduces the tendency of the wrench to cock. For access to areas where sockets and attachments will not fit or where greater leverage is required. | *$30.06 |
|
|
|
|
|
| eBay Results |
|---|
| | Title | Price | Shipping | Total | Currency | Time Left |
|---|
 | Air Motor, 14.2 in-lbs Torque, 2.362" (60 mm) Diameter | 1236.92 | 0.00 | 1236.92 | USD | 35 minutes 29 seconds |  | Air Motor, 80.5 in-lbs Torque, 2.362" (60 mm) Diameter | 1302.02 | 0.00 | 1302.02 | USD | 49 minutes 56 seconds |  | Parker Hydraulic, D1VW6CNYCF5, New | 259.99 | 0.00 | 259.99 | USD | 50 minutes 20 seconds |  | Parker Hydraulic, D1VW4CNYCF, New | 225.99 | 0.00 | 225.99 | USD | 52 minutes 50 seconds |  | Parker Hydraulic, FM2DDKN, New | 145.99 | 0.00 | 145.99 | USD | 55 minutes 3 seconds |  | Parker Hydraulic, PRM2PP25KN, New | 149.99 | 0.00 | 149.99 | USD | 57 minutes 11 seconds |  | Parker Hydraulic, CPOM2DD, New | 149.99 | 0.00 | 149.99 | USD | 1 hour 12 seconds |  | Air Motor, 129.2 in-lbs Torque, 2.362" (60 mm) Diameter | 1334.57 | 0.00 | 1334.57 | USD | 1 hour 5 minutes 8 seconds |  | Parker Pneumatic, 1.12USL1603.0, Air cylinder, New | 29.99 | 0.00 | 29.99 | USD | 1 hour 8 minutes 10 seconds |  | 1x used SMC Pneumatic Air Slide 20-MGQL20-20-Y59A | 34.99 | 0.00 | 34.99 | USD | 1 hour 18 minutes 19 seconds |  | Air Motor, 515.1 in-lbs Torque, 2.362" (60 mm) Diameter | 1367.12 | 0.00 | 1367.12 | USD | 1 hour 21 minutes 21 seconds |  | 120VAC 3-WAY GENERAL PURPOSE SOLENOID VALVE | 18.00 | 4.00 | 22.00 | USD | 1 hour 23 minutes 50 seconds |  | ROSS 2783A6006 L-O-X 3/2 LOCK-OUT & EXHAUST VALVE NEW | 27.05 | 0.00 | 27.05 | USD | 1 hour 25 minutes 14 seconds |  | ROSS 2783A6006 L-O-X 3/2 LOCK-OUT & EXHAUST VALVE NEW | 27.05 | 0.00 | 27.05 | USD | 1 hour 25 minutes 16 seconds |  | 1 LHA SUCTION STRAINER SEH-50-2-100-RV3 | 40.00 | 8.95 | 48.95 | USD | 1 hour 30 minutes 31 seconds |  | Air Motor, 1030.2 in-lbs Torque, 2.362" Diameter | 1399.67 | 0.00 | 1399.67 | USD | 1 hour 35 minutes 29 seconds |  | NEW VICKERS HYDRAULIC DIRECTIONAL VALVE DG5S4 DGMFN | 325.00 | 0.00 | 325.00 | USD | 1 hour 44 minutes 16 seconds |  | Welded Tee Cylinder 2500 PSI, 3"Bore, 20"Stroke, 1.5" | 219.99 | 23.04 | 243.03 | USD | 1 hour 45 minutes 17 seconds |  | DURCO 1-1/2" STEEL PLUG VALVE WITH AUTOMAX ACTUATOR | 225.00 | 0.00 | 225.00 | USD | 1 hour 45 minutes 51 seconds |  | Air Motor, 21.2 in-lbs Torque, 3.150" (80 mm) Diameter | 1660.08 | 0.00 | 1660.08 | USD | 1 hour 49 minutes 53 seconds |  | Murata Z06-39292-81 Speed Elbows (5) SMC AS1201F-M5-04 | 28.90 | 0.00 | 28.90 | USD | 1 hour 50 minutes 40 seconds |  | MTA Compressed Air Dryer 2003 | 200.00 | 0.00 | 200.00 | USD | 1 hour 59 minutes 23 seconds |  | GATES Female JIC 37ยบ Flare Swivel G-20 Series Coupling | 8.95 | 10.65 | 19.60 | USD | 2 hours 1 minute 50 seconds |  | New Enerpac SCR 102H 10 Ton Pump And Cylindr Set | 620.00 | 99.00 | 719.00 | USD | 2 hours 1 minute 57 seconds |  | Air Motor, 71.7 in-lbs Torque, 3.150" (80 mm) Diameter | 1692.62 | 0.00 | 1692.62 | USD | 2 hours 3 minutes 31 seconds |  | ACE MC 3350-1 SHOCK ABSORBER MC3350-1 NEW in BOX | 44.37 | 0.00 | 44.37 | USD | 2 hours 8 minutes 43 seconds |  | Lot 25 Stainless Hydraulic Pressure Vent Plugs, 5/8-18 | 14.99 | 4.95 | 19.94 | USD | 2 hours 9 minutes 13 seconds |  | Parker Fluid Power Hydrolic Cylinder 1.5 bore 10" strok | 18.99 | 0.00 | 18.99 | USD | 2 hours 9 minutes 53 seconds |  | PHD SDD13X6-AE-AR-E Pneumatic Slide + Cylinder ! WOW ! | 39.99 | 0.00 | 39.99 | USD | 2 hours 12 minutes 3 seconds |  | 26pc Vickers Cylinder Mounting Parts NEW | 17.00 | 0.00 | 17.00 | USD | 2 hours 14 minutes 38 seconds |  | Air Motor, 143.4 in-lbs Torque, 3.150" (80 mm) Diameter | 1725.18 | 0.00 | 1725.18 | USD | 2 hours 16 minutes 18 seconds |  | NUMATICS R30R-04G REGULATOR VALVE w. GAUGE New Surplus | 31.96 | 0.00 | 31.96 | USD | 2 hours 17 minutes 35 seconds |  | SMC MX525-30 + CV-09016502 Pneumatic Slide ! WOW ! | 29.99 | 0.00 | 29.99 | USD | 2 hours 19 minutes 59 seconds |  | Sun Hydraulics RPEE-LAN Piston Relief Valve | 44.00 | 9.00 | 53.00 | USD | 2 hours 20 minutes 58 seconds |  | SMC CDM2U32-50A-C73-XC8 CYLINDER 145 PSI ~ NEW | 39.96 | 0.00 | 39.96 | USD | 2 hours 23 minutes 20 seconds |  | SMC XTO-1239-04 PILOT CHECK VALVE ~ New Surplus | 26.22 | 0.00 | 26.22 | USD | 2 hours 23 minutes 31 seconds |  | 2pc Elon College Air Check Valve 8830E6 NEW | 100.00 | 0.00 | 100.00 | USD | 2 hours 26 minutes 2 seconds |  | Air Motor, 191.2 in-lbs Torque, 3.150" (80 mm) Diameter | 1757.72 | 0.00 | 1757.72 | USD | 2 hours 27 minutes 17 seconds |  | SMC NCDGBN25-0600-G5PL Pneumatic Cylinder ! WOW ! | 59.99 | 0.00 | 59.99 | USD | 2 hours 28 minutes 48 seconds |  | New Rexroth C4I 3 Way Bistable Ball Valve, 5352600100 | 18.00 | 0.00 | 18.00 | USD | 2 hours 30 minutes 18 seconds |  | Deltrol EC10B Check Valve 10120-73 MX Needle EC-10-B | 16.99 | 4.80 | 21.79 | USD | 2 hours 31 minutes 44 seconds |  | Deltrol EC20SS Stainless Steel 1/4" Check Valve 1012076 | 34.99 | 5.00 | 39.99 | USD | 2 hours 31 minutes 54 seconds |  | Deltrol EV125A Quick Exhaust Valve 10135-67 EV-125A | 14.99 | 4.80 | 19.79 | USD | 2 hours 32 minutes 12 seconds |  | Deltrol N10B Needle Valve EN10B Pneu-Trol N-10-B Check | 7.49 | 4.80 | 12.29 | USD | 2 hours 32 minutes 21 seconds |  | Detrol EF25B Flow Control Valve Needle 3/8" NPT Brass | 21.99 | 5.00 | 26.99 | USD | 2 hours 32 minutes 31 seconds |  | NEW HONEYWELL SKINNER 734 19AN2NN00N0C111P3 VALVE 120 V | 60.00 | 0.00 | 60.00 | USD | |  | Hystar Hydraulic Directional Valve D03 110 Volt Tandem | 115.00 | 0.00 | 115.00 | USD | 2 hours 35 minutes 13 seconds |  | Prince Manufacturing Hydraulic Cylinder PMC-8324 3x24 | 206.00 | 0.00 | 206.00 | USD | 2 hours 35 minutes 18 seconds |  | Prince Manufacturing Hydraulic Cylinder PMC-5624 4x24 | 323.00 | 0.00 | 323.00 | USD | 2 hours 35 minutes 20 seconds |  | Prince Manufacturing Hydraulic Cylinder PMC-5524 3.5x24 | 270.00 | 0.00 | 270.00 | USD | 2 hours 35 minutes 21 seconds | |
|