 | 1 1/2 Bore x 2. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-23
Front Nose Mount - Double Acting | *$54.14 |
| 5/16 Bore x 1. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-1
Front Nose Mount - Double Acting | *$22.10 |
 | Clevis Mounting Brackets, Use w/Bore Size 3/4, 1 1/16 (1 Each)
Brand: Reid Supply Company Part Number: PAC-730
Clevis Mounting Brackets | *$4.42 |
 | 3/8 NPT, 125.3 SCFM Flow, Parker Check Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-306
Needle, Check and Flow Control Valves | *$39.80 |
 | 3/4 NPT Ports, 1. NPT Inlet, 4 Port, 2.25 W x 12.00 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-260
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$62.39 |
 | 7/8 Bore x 2. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-75
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$37.30 |
 | 3/8 NPT Ports, 1. Inlet, 16 Port, 1.75 Hex. x 19. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-218
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$76.03 |
 | Mounting Brackets for 1. inlet Size (1 Each)
Brand: Reid Supply Company Part Number: NM-106
Mounting Bracket | *$7.73 |
 | 3/8 NPT Ports, 1 1/2 Inlet, 16 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-15
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$72.92 |
 | 1 1/2 Bore x 2. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-215
1-1/2" Bore Stud Mount Double Acting | *$36.93 |
 | 3/4 NPT, Parker Regulators w/Gauge (1 Each)
Brand: Reid Supply Company Part Number: MFP-367
Regulators with Gauge - These regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. Rolling diaphragm design gives repeatable performance with low hysteresis over a wide range of pressures. Pressure range is 2-125 psi and temperature range is 32°F to 125°F. | *$61.99 |
 | 1 3/4 Bore x 2. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-255
1-3/4" Bore Stud Mount Double Acting | *$50.84 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 8 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-08
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$60.19 |
| 1/4 NPT Ports, 1. NPT Inlet, 4 Port, 2.25 W x 9.75 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-230
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$51.40 |
 | 1/4 NPT Port, 10-32 Pilot Port, Parker Blocking Valves w/Threaded Connection (1 Each)
Brand: Reid Supply Company Part Number: MFP-488
Blocking Valves w/Threaded Connection - Blocking valves are designed for precise repeatable stopping of moving cylinders or to maintain the position of a cylinder in the event of an air pilot signal loss. Blockers are used for positioning, jogging, and safety purposes. Operating pressure is 0 -150 psi with a temperature range of 5°F to 140°F. Maximum operating frequency is 10 Hz with a life expectancy of 10 million cycles at 90 psi, 68°F, dry air and 1 Hz operating frequency. | *$85.69 |
 | 1/4 NPT Port, 24.9 SCFM Flow, ARO Flow Control Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-360
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$22.53 |
 | 1/4 NPT, 19.3 SCFM Flow, Parker Flow Control Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-309
Needle, Check and Flow Control Valves | *$45.34 |
 | 1/8 NPT, 12 V DC, 4-Way Stacking, ARO Selenoid Valves, w/Speed Control (1 Each)
Brand: Reid Supply Company Part Number: ARO-480
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$71.38 |
| | 7/16-20 Thd., Rod Clevis Assemblies, Use w/Bore Size 1 1/2 (1 Each)
Brand: Reid Supply Company Part Number: PAC-660
Rod Clevis Assemblies | *$6.95 |
| | 3/8 NPT Ports, 1. Inlet, 8 Port, Nylon Manifolds, White (1 Each)
Brand: Reid Supply Company Part Number: NM-26
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$38.81 |
| 7/8 Bore x 4. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-77
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$41.86 |
| 1 1/2 Bore x 3. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-24
Front Nose Mount - Double Acting | *$53.63 |
 | 5/16 Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-10
5/16" Bore Stud Mount Double Acting | *$17.14 |
| 2. Bore x 5. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-110
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$102.04 |
 | 7/16-20 Fine Thd., Parker Rod Clevises (1 Each)
Brand: Reid Supply Company Part Number: MFP-176
Rod Clevises | *$31.03 |
 | 1/4 NPT Ports, 3/8 NPT Inlet, 10 Port, 1.25 W x 15.25 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-520
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$20.84 |
 | Parker Reed Sensor w/Flying Leads (1 Each)
Brand: Reid Supply Company Part Number: MFP-286
Extra Low Profile Accessories Reed Sensor | *$29.73 |
 | 1 1/16 Bore x 1. Stroke, Double Acting, Compact, ARO Composite Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: ARO-635
Cylinders are double acting, with a single rod end. Cylinder barrel is made from a unique cross-wound thermo set epoxy. This creates a very strong and lightweight cylinder. The high impact resistance reduces the chances of cylinder failure due to dings or dents. Interior surface is self-lubricating, which insures highly reliable performance and an extended seal life. Cylinder heads are clear anodized aluminum alloy with stainless steel tie bolts. Maximum pressure is 200 psi. Cylinder temperature rating is -25°F to +225°F. | *$67.25 |
 | 3/8 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Red (1 Each)
Brand: Reid Supply Company Part Number: NM-422
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$67.06 |
 | Parker Metal Bowl Guard Kits, Use w/MFP-357, 358, 359, 361, 362, 363 (1 Kit)
Brand: Reid Supply Company Part Number: MFP-511
Metal Bowl Guard Kits | *$10.01 |
 | 5/8 Bore x 3. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-90
5/8" Bore Stud Mount Double Acting | *$19.23 |
| 5/8 Bore x 1 1/2 Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-80
5/8" Bore Stud Mount Double Acting | *$16.99 |
| 7/8 Bore x 2. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-12
Front Nose Mount - Double Acting | *$28.90 |
 | 3/8 NPT Ports, 24 V AC, Three Position Double Closed Center Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-436
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$158.89 |
 | 1/2 NPT, 3.19 OAL, Parker Exhaust Port Silencers (1 Each)
Brand: Reid Supply Company Part Number: MFP-212
Exhaust Port Silencers | *$21.87 |
 | 1 1/2-12 Thd., Parker Mounting Nuts, Use w/Cylinder Bore Size 3. (1 Each)
Brand: Reid Supply Company Part Number: MFP-551
Accessories - Mounting Nuts | *$6.67 |
 | 1/2 NPT Port, 85.3 SCFM Flow, ARO Needle Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-390
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$34.81 |
 | 7/16 Bore x 1. Stroke, Double Acting - Front Block Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-52
Front Block Mount - Double Acting | *$35.61 |
 | 5/8 Bore x 3. Stroke, Double Acting, Universal Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-120
5/8" Bore Universal Mount Double Acting | *$22.10 |
 | 1/4 NPT Port, 29.5 SCFM Flow, ARO Check Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-500
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$18.43 |
| 3/8 NPT, Parker Regulators w/Gauge (1 Each)
Brand: Reid Supply Company Part Number: MFP-365
Regulators with Gauge - These regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. Rolling diaphragm design gives repeatable performance with low hysteresis over a wide range of pressures. Pressure range is 2-125 psi and temperature range is 32°F to 125°F. | *$61.80 |
 | 3/8 NPT Inlet Port, 3/8 NPT Cyl. Port, 3/8 NPT Exaust Port, 240 SCFM Flow, Parker Quick Exhaust and Shuttle Valves w/Urethane DiaPhram (1 Each)
Brand: Reid Supply Company Part Number: MFP-214
Quick Exhaust and Shuttle Valves With Urethane Diaphragm | *$31.63 |
 | 1/4 NPT Ports, 3/4 Inlet, 8 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-306
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$50.03 |
| 1 1/2 Bore x 4. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-225
1-1/2" Bore Stud Mount Double Acting | *$41.97 |
| 1 1/4 Bore x 2. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-17
Front Nose Mount - Double Acting | *$45.50 |
 | 1/8 NPT Ports, 1/4 NPT Inlet, 6 Port, 1.00 W x 4.75 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-100
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$14.22 |
 | 1/8 NPT, 1/4 Tube SizeParker Right Angle Flow Controls w/Presto Lock Fittings (1 Each)
Brand: Reid Supply Company Part Number: MFP-326
Right Angle Flow Controls with Presto Lock Fittings | *$24.83 |
| 1 1/2 Bore x 3. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-220
1-1/2" Bore Stud Mount Double Acting | *$38.51 |
| 3/8 NPT Ports, 1. Inlet, 16 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-14
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$59.05 |
| 1 1/16 Bore x 1/2 Stroke, Double Acting, Compact, ARO Composite Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: ARO-630
Cylinders are double acting, with a single rod end. Cylinder barrel is made from a unique cross-wound thermo set epoxy. This creates a very strong and lightweight cylinder. The high impact resistance reduces the chances of cylinder failure due to dings or dents. Interior surface is self-lubricating, which insures highly reliable performance and an extended seal life. Cylinder heads are clear anodized aluminum alloy with stainless steel tie bolts. Maximum pressure is 200 psi. Cylinder temperature rating is -25°F to +225°F. | *$63.67 |
|
